|Grade||Genuine Rolex||AAAAA Clone||AAA Replica||A Replica|
|Movement||Rolex Calibre 3135||Genuine Swiss Clone 3135 movement||Swiss 2836 Movement||Asian 2813 Movement|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Bezels||Bi-directional Rotating Time-Lapse||Bi-directional Rotating||Fixed||Fixed|
|Crystal||Sapphire crystal||Sapphire crystal correct date magnification||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Rolex||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Rolex Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
|Engine||Rolex Calibre 2836/2813|
Band Material: 316L. In this band, 316L, which is the most corroded by daily seawater, is used, which is completely sufficient.
Function: Date, Hour, Minute, Second. The watch is a very important appliance in everyone’s life, and the watch can be used to measure time and seconds accordingly.
Watch Case: 316L. The material in this case comes from 316L stainless steel, which has excellent corrosion resistance. It is hypoallergenic and scratch resistant.
Bezel Material: Stainless Steel. The stainless steel bezel is more simple and endurable. It makes you improve your taste from the inside out.
Water Resistance: 30 meters. We make the watch waterproof at 30 meters. But make sure to close the crown properly. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.
Second Markers: Minute Markers around the outer rim. The design of the second hand in the watch is as shown in the picture above, which can be used for many purposes, such as clocks, radios with clocks, etc.to create timeless works.
Crystal: Sapphire Crystal. The watch is made of sapphire, high-end, and has a good reputation. Tips: The A Replica is applied with mineral glass instead of sapphire.
Case Back: Solid. The solid bottom cover will have better water resistance than the through bottom. A waterproof sealing ring is added to the through-bottom watch, which makes it difficult to seal.
Luminiscence: Hands and Markers. About the watch, the luminiscence is hands and markers. As you can see in the pictures above.
Dial Markers: luminous dot. We can use a watch with a luminous point, which is a small LED light source, which can be used as a time indicator for the watch.
1:1 Clone, A Replica, AAA Replica, AAAAA Clone, Top 1:1 Clone